Hello everyone, one of the hairstyles I want to talk about today is about pillowcases. All the pillowcases we bought in the supermarket are basically divided into fronts and backs. The front is made in one step, and the back is two pieces of cloth. Ah, we need to make a hole for the splicing to put the pillow core in, but if we do this, it will have a bad feeling for me, that is, when we use the card surface, it feels very neat, if the pillow When it is turned over, we have to turn it over to the front, because the reverse side is there, and our head touches it, we always feel that the zipper opening of the pillow is pressed against our head, or it is sealed, and an opening is open there, it always feels like strange.
For this reason, I made a pillow case for myself, instead of buying a pillow case, I made a pillow with invisible zipper. The biggest advantage of this is that we use the front side when we use the front side, and the back side is also the front side, so it will not exist. When we go to bed, we also need to check whether the pillow is normal, so that the invisible zipper does not exist at all. This problem, And both the front and back can be used, which can also prolong the use time of our pillows. Without further ado, we will enter the production and bring you different clothing modifications tomorrow, thank you.
We just used the remaining piece of cloth to make a pillow. The pillow cores we usually buy are 50 cm, so the size of the pillow is about the same. My two palms are more than 40 cm, and I don’t need to make them too big. The length is 60 and then a little longer, OK, this is the shape of the pillow, we have already cut it, then seal the edge and leave a mouth, leave a mouth on this side, leave the longest mouth, turn the zipper plug and extend it in, then first Put it together.
One centimeter should be left here, and the invisible zipper should be installed. It is best to leave 1.5 centimeters wide. Then close this edge, and the fabric edge is wider. Let us leave it wider and the fabric edge is in this position. so wide. Now we need to judge how long the opening should be, and judge the position of the zipper according to the length of the zipper. After leaving the zipper, we need to make two layers of cloth, so that the two layers of cloth are neat, I want one long and the other short. It’s not easy to install zippers. Then we lock it on the side, then after we lock the side, we can make this zipper.
In this place, I want to tell you that it doesn’t matter if there is no stitching machine, even this cotton cloth is not very easy to burr. Without the stitching machine, you can’t lock the hem, and you want to make it clean inside. smooth. We can sew from the front first, sew the front to the front first, and trim the straight mouth to the smallest position after sewing. After the repair is done, we will turn it over, so that it will be edged in reverse. This stitched tube is suitable for no hemming machine, and if it is made, the edge will be more perfect and more beautiful than the hem. Everyone can do this at home. Now we’re going to make him invisible zippers and change his feet.
From the position of the needle, the zipper head has a tuyere called the hole we reserved. If the zipper is not separated like this, we get a new zipper, the teeth are closed like this, we You can watch the small video on my screen, you can open it like this, put it under the iron and let it faint, and it will naturally become hot when it is hot. The seam of this zipper will be reversed. Yesterday, I have already talked about the installation method of the invisible zipper in the video,
You can find some postures from your invisible zipper practice yesterday, and then pay attention here, that is, it must be placed flat, as long as the cloth is flat, the zipper is flat, and pressed, OK, that’s it, don’t put too much Length, we want a distance of about ten centimeters, we fix it, and that’s it. When the end is about to end, we align it here, seal this place with two tapes to align it, and then straighten it, and it’s done like this. There is still the most important step. When we are filling the pillow core, the hole will definitely be pulled. The most important problem is that we must seal the hole and seal it, like this.
As I am now, lay it in two layers and lay it flat, punch it in the hole, and reverse the needle back and forth. In this way, we can’t break it even by pulling it hard. To achieve this state, the needle must be punctured. The opening will split, because when the whole core is installed, the opening will be opened, and both ends must be punctured, and this end will reach the position where the zipper ends, and then such a simple shaping will be done, Close the zipper, so that when we sleep, the zipper will not be against our head or our neck, which is more comfortable. Friends with obsessive-compulsive disorder are very comfortable to use this pillow. It is front and front, no matter how you turn it, it is the front. Look at it to see if it is neat.
If we need to make a lotus leaf board and a leaf edge car in the middle, we can do it. If we need to make a wide edge decoration, then we can cut it a little wider and leave the edges on both sides to cover it. Today’s video will be shared with everyone here, thank you, if you have better practices, better opinions or suggestions, you can leave a message in the comment area, which can enrich my content and let everyone learn more The sewing knowledge, thank you all.
