SaleBestseller No. 1
Powerbuilt Power Steering and Alternator Pulley Remove and Install Tool Set, Replace Vehicle Steering Pump, Car Repair Tools, Storage Case – 648605
- Made to be the most reliable tools in the market today
- Tool solutions for most all situations
- Built to exceed tool standards
- For pulling and installing power steering pump and alternator pulleys.
- Tool set for removal and installation of power steering pump and alternator pulleys
- For use on most power steering pump pulleys
- Includes special installer adapters, puller assembly with thrust bearing, jaw and sleeve
- Storage case includes usage photos
- Kit 20 includes 14-Piece for removal and installation of the power steering pump and alternator pulleys
Bestseller No. 2
Orion Motor Tech 3″ 4″ 6″ 3-Jaw Gear Puller Set for Removal of Bearings Pulleys Flywheels
- Universal Removal Tool: This 3-jaw removal tool set works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more, removing even rusted parts easily and—thanks to its even distribution of force—without damage.
- Better Together: This professional or home tool kit includes three puller sizes to cover most applications: a 3 inch gear puller with a 4.3″ max. reach and 3″ max. spread; a 4 inch gear puller with a 5″ max. reach and 4″ max. spread; and a 6 inch gear puller with a 7.3″ max. reach and 6″ max. spread.
- Versatile Reversible Design: Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside as needed.
- 45# Carbon Steel: All parts are made with premium heat-treated AISI 1045 medium carbon steel for maximum strength. The jaws are galvanized and the central screw coated with black oxide to provide superior corrosion resistance and long service life.
- Satisfaction Guaranteed: Along with this gear and bearing removal tool kit’s durable material and careful engineering, you can rest easy knowing that these gear pullers are backed by Orion Motor Tech’s warranty and friendly customer service.
SaleBestseller No. 3
Lisle 39000 Pulley Puller
- The unique puller body completely houses the pulley hub to prevent slipping on even the tightest pulleys
- Works on traditional V-shaped pulleys and serpentine belt system pulleys
- Also works faster than other conventional pulley pullers
- Fits most domestic models including GM 3.1 and Quad 4 engines
Bestseller No. 4
OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW , green
- POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles; Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines
- WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps; Pulls pulleys on GM belt-driven vacuum pumps
- HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability; Power steering pump pulley installer designed to tackle any small pulley job
- CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability; Take this power steering pump puller/installer from job to job while keeping your puller kit organized
- PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches; Pulls pulleys on GM belt driven vacuum pumps; Pulls pressed-on water pump pulleys of GM V6 engines
Bestseller No. 5
Thorstone Power Steering Pulley Puller Installer Kit for Water Pump, Vacuum Pump Pulleys Installation Remover on Most Engines
- 🚖APPLICATION – Used for removing and installing pressed-on alternator, power steering pump and other pulleys.
- 🚖COMPATIBILITY – Fits on late GM, Ford and Chrysler engines; Includes special adapters for GM 3.2 Quad 4 engines and Ford Modular engines.
- 🚖HIGH-QUALITY – Made of high carbon steel construction and excellent manufacturing process, exquisite mold and screws for your comfort.
- 🚖PACKAGE – Blow molded carrying case for easy transportation, safe storage and quick organization.
- 🚖100% SALE SUPPORT -We back up all products for life, 24*7 fast response customer service free all your concerns. Sincerely thanks for your support to Thorstone!
Bestseller No. 6
Orion Motor Tech Power Steering Pump Pulley Puller Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler
- POWER STEERING REPAIR SET: This Orion Motor Tech tool kit for home and professional power steering repair pulls and installs any pump pulley with a 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inch hub diameter
- COMPLETE 7-PIECE SET: This pulley pump puller kit includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool; the reversible puller jaw design also lets you check and repair pulley flanges with greater ease
- DURABLE PERFORMANCE: Each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right; each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use
- WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines; the two forcing screws also work with most VW vehicles’ power steering systems
- USER FRIENDLY: This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation; the custom blow-molded case keeps everything well organized and easy to store or carry between jobs
Bestseller No. 7
OEMTOOLS 25090 Harmonic Balancer Puller Kit, Adjustable 3-Jaw Puller Fits Most Late Model Automobiles & Trucks, Forcing Screw Fits a 3/8” Square Drive, Includes 4 Forcing Rods, 6 Piece
- FOR PRESSED-ON HARMONIC BALANCERS: Harmonic balancer tool is designed for pressed-on harmonic balancers with a single center retainer bolt; Uses 3 jaw puller arms with significant bite to grip and remove spoke-style pressed-on harmonic balancers
- WIDE APPLICATION: Crankshaft harmonic balancer puller designed for use with Model GM 2000 Generation II Cadillac (1988 – Newer), Chevrolet Trucks (2003 – Newer), Chrysler (1990), Ford (1995 – Newer), and Mitsubishi Eclipse (1995)
- EASY TO USE: Unique spring-loaded jaws hold the legs in place when positioning the harmonic balancer removal tool, making removing and reinstalling the harmonic balancer a relatively simple and inexpensive process
- INSTRUCTIONS AND STORAGE CASE INCLUDED: Our harmonic balancer pulley removal tool comes with easy-to-follow instructions and a durable blow-molded carrying case; Easily take this harmonic balancer puller set from job to job
- PRODUCT SPECIFICATIONS: Includes Puller Body, 3-Jaw Puller, (3) Jaw Retaining Pins, (3) Wave Washers, (4) Pressure Screw Adapter Rods (4″, 5-13/32″, 6-1/2″, and 7-13/32″); Blow-Molded Carrying Case
Bestseller No. 8
Arcan Hardened 4-Inch Gear Puller with Reversible Jaws (AS4GP)
- REVERSIBLE JAWS: 8 adjustable positions that allow for inside and outside grip.
- HEAT TREATED CHROME VANADIUM STEEL- Added strength that lasts longer than standard hardened steel gear pullers.
- CHROME FINISH: Easy to clean and reduces oil and grease build up.
- DAMAGE FREE REMOVAL- Removes slide gears, pulleys, and flywheels off of a shaft without damaging your application.
- JAW SPREAD: 6. 5″
- JAW REACH: 2. 7″
Bestseller No. 9
Orion Motor Tech Power Steering Pump Pulley Puller/Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler Vehicles
- POWER STEERING REPAIR SET: This Orion Motor Tech tool kit for home and professional power steering repair pulls and installs any pump pulley with a 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inch hub diameter
- COMPLETE 7-PIECE SET: This pulley pump puller kit includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool; the reversible puller jaw design also lets you check and repair pulley flanges with greater ease
- DURABLE PERFORMANCE: Each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right; each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use
- WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines; the two forcing screws also work with most VW vehicles’ power steering systems
- USER FRIENDLY: This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation; the custom blow-molded case keeps everything well organized and easy to store or carry between jobs
Bestseller No. 10
Thorstone 46pcs Harmonic Balancer Puller Set, Steering Wheel Flywheel Crankshaft Pulley Puller
- 🚖MULTIFUNCTION – Allowing unit to be used with harmonic balancer, flywheel, crankshaft, steering wheel, pulley and other two or three hole applications.
- 🚖HIGH-QUALITY – All components are crafted from heat treated carbon steel with oxide finishes, helping the tool withstand tough pulling jobs and resist rust.
- 🚖COMPATILIBIYTY – Includes 30 different bolts and a four-yoke slot, can handle a range of jobs on most cars, trucks, SUVs and small engine vehicles.
- 🚖PACKAGE – Comes with a heavy duty blow molded carrying case, for easy transportation, safe storage and quick organization.
- 🚖100% SALE SUPPORT -We back up all products for life, 24*7 fast response customer service free all your concerns. Sincerely thanks for your support to Thorstone!
Bestseller No. 11
Orion Motor Tech 3″ 4″ 6″ 8″ 3-Jaw Gear Puller Set for Removal of Bearings Pulleys Flywheels
- Universal Removal Tool: This 3-jaw removal tool set works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more, removing even rusted parts easily and—thanks to its even distribution of force—without damage.
- Better Together: This professional or home tool kit includes four puller sizes to cover most applications: a 3 inch gear puller with a 4.3″ max. reach and 3″ max. spread; a 4 inch gear puller with a 5″ max. reach and 4″ max. spread; a 6 inch gear puller with a 7.3″ max. reach and 6″ max. spread; and an 8 inch gear puller with a 9.3″ max. reach and 8″ max. spread.
- Versatile Design: Each of the three smaller 3-jaw gear and bearing pullers can be reversed to pull parts from the inside or outside; the 8 in. puller can be used in 4 different positions to deal with both medium and large parts.
- AISI 1045 Medium Carbon Steel: All parts are made with premium heat-treated 45# carbon steel for maximum strength. The jaws are galvanized and the central screw coated with black oxide to provide superior corrosion resistance and long service life.
- Satisfaction Guaranteed: Along with this gear and bearing removal tool kit’s durable material and careful engineering, you can rest easy knowing that these gear pullers are backed by Orion Motor Tech’s warranty and friendly customer service.
Bestseller No. 12
Shankly Harmonic Balancer Puller, Crankshaft Pulley Removal Tool or Harmonic Pulley Puller Tool, Steering Wheel Puller Kit with Heavy-Duty Case for Pulley Puller and Installer Kit
- ✅ HARMONIC BALANCER PULLER SET: This pulley puller, and other tools are designed to handle a variety of jobs, giving the user multiple uses for a single toolset and allowing for the easy and simple removal of steering wheels and crankshaft pulleys
- ✅ TIME SAVER: This gear puller tool or harmonic puller eliminates the need for a technician to go through the time-consuming process of first removing the radiator before being able to remove the pulley
- ✅ STRONG JAW DESIGN: This harmonic balancer puller jaw design or (tools flywheel puller tool set) provides greater durability, clevis pins allow jaws to be quickly removed and installed, allowing the user to finish the job quickly and effectively
- ✅ IDEAL FOR TIGHT SPACES: Shankly’s pully puller tool or gear puller is designed to extract damper pulleys in tight engine compartments, the compact design provides more room to work than many harmonic balancer puller tool
- ✅ HEAVY-DUTY CASE: This harmonic balancer puller/installer set or puller set sits neatly in a tidy blow molded case with a built-in handle and slide latches making it simple and easy to move and store this tool
Bestseller No. 13
WINTOOLS 12 Pcs Pulley Puller Remover & Installer Kit Power Steering Pump Alternator Pulley
- Removes pressed-on alternator and power steering pulleys on late-model GM and Chrysler engines.
- The threaded end installs late model GM alternator and power steering pulleys, including Quad 4
- This puller fits some AMC vehicles. Will NOT work on 3.3L and 3.5L Chrysler engines
- Reverse the jaws to pull the alternator internal bearing.
- Case Dimensions: (L)9″ x(W)7.25″ x(H)2″. Weight 2 lbs.
Bestseller No. 14
ARES 71002 – Harmonic Balancer Puller Set – Remove Damper Pulleys in Tight Engine Compartments Without Removing The Radiator – Storage Case Included
- ITEM SPECIFICATIONS: Our Harmonic Balancer Puller Set is designed for removing damper pulleys in tight engine compartments without removing the radiator. The set features an enhanced design for optimal position retention, and the steel construction provides extra strength and longevity with a Black Oxide finish for corrosion resistance.
- INCLUDES: This high quality set includes a 3-jaw puller, four lengths of forcing rods, a forcing screw with a 3/8-inch square drive for use with a ratchet and a 3/4-inch hex for wrench or socket use. It also includes a high quality storage case so you’ll never have to go looking for a tool again!
- COMMON APPLICATIONS: This set is compatible with Chrysler, compatible with GM, compatible with Mitsubishi, compatible with Cadillac, and compatible with Oldsmobile cars, SUVs, vans, and pickup trucks.
- RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools that make an impact. You are backed by our Performance Assurance. If you have any issues with your ARES harmonic balancer puller set set, simply contact customer service for troubleshooting help, parts, replacement, or refund.
- ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we’re proud to help this great organization.
Bestseller No. 15
OTC (522) Large Gear and Pulley Puller
- With OTC’s 522 Large Gear and Pulley Puller you can easily remove a wide range of gears, pulleys or other parts that have tapped holes
- Spread from 2 inches to 7-3/4 inches; block is 8-1/4 inches wide
- Forcing screw is 3/4 inch-16 x 11-5/8 inches long
- Accommodates any cap screw up to 1/2 inch diameter
- Similar to Ford D80L-522-A and 303-D025
