Bestseller No. 1
Universal Electric kWh Meter – Omnimeter I v.3
- Universal Smart Meter – Works on any electrical system up to 480V
- Submeter Any Electrical Load and Read the Results Over the Web
- 120 to 480 volts — 100 to 5,000 amps — 50 or 60Hz
- 1-phase or 3-phase — Accurate to 0.5% — Wide Selection of CTs
- The Best Communicating Smart Meter for the Lowest Price — CTs NOT Included in Price
Bestseller No. 2
Smart KWh Meter 120V USA MKT. 100 Amps. Single Phase 2 Wires Energy anylizer with Modbus RTU
- Energy Analyzer Single phase 2 wires 120 Volts. 60 Hz. Up to 275 V. capable.
- AMR ready with RS485 communications port and Pulse output
- Small and powerful energy analyzer, many parameters!
- Works with 120 Volts in the USA
- External 100 Amps. Split Core CT makes it very easy to install without disconnecting or cutting wires
Bestseller No. 3
DAE DEM730P Electric kWh Submeter, RS485, 1P3W (2 Hot wire, 1 Neutral), 120/240V, 50A, Internal CT
- DAE Cloud Metering (2nd picture) available with DAE CC2030 KIT Gateway. CC2030 will collect energy data from DAE electrical meters and send them to Cloud Server through Ethernet. With PC, cell phone or tablet, landlords or property managers can get access to real time data, monthly kWh and billing reports to their tenants. TOU (Time of Use) billing reports are also available. No IT guy required. Just connect wires as per picture 5 or video & ready to go.
- For existing building, hard to draw cable between electric meter (close to electric panel) and CC2030 (close to your router), please choose 1 CC2030 KIT + 2 WSC500 RF Converters to connect electric meter and CC2030 wirelessly. (3rd Picture) Just connect wires as per picture 6 or video & ready to go.
- Conforms to International Standard IEC61036. For UL/cUL listed and California CTEP approved electric meters, please refer to DAE Polaris 1500 series like DAE P153-200-S KIT
- Factory Calibration Certificates available. DAE Controls LLC is a Minority Business. Please feel free to get the NMSDC Minority Supplier Certificate from DAE Controls Website.
- Indoor use only, DAE B1725 watertight enclosure is available for outdoor use.
Bestseller No. 4
DAE DDM730 120/240V kWh Meter, 100 Amp, 1P3W (2 hot wires, 1 neutral), Internal CT, 60 Hz, Pass Through
- DDM730P is ready for Cloud Metering (2nd picture) with DAE CC2030 Gateway. CC2030 will collect energy data from DAE electrical meters and send them to Cloud Server through Ethernet. With PC, cell phone or tablet, landlords or property managers can get access to real time data, monthly kWh and billing reports to their tenants. TOU (Time of Use) billing reports are also available. No IT guy required. Just connect wires as per a simple picture (see video) & ready to go.
- Wireless remote reading available with DAE WSC500 RF converters.
- Conforms to International Standard IEC62053-21 and IEC62052-11. For UL/cUL listed and California CTEP approved electric meters, please refer to DAE Polaris 1500 series like DAE P153-200-S KIT. Factory Calibration Certificates available. DAE Controls LLC is an Minority Business. Please feel free to get the NMSDC Minority Supplier Certificate from DAE Controls Website.
- Indoor use only, DAE B1725 watertight enclosure is available for outdoor use.
Bestseller No. 5
DAE P254-200-S KIT, UL CTEP kWh Smart Submeter, 3 phase 4 wire (3 hot wire, 1 neutral), 200A, 120/208v, 3 CTs, RS485
- UL/cUL Listed, California CTEP approved. Conform to ANSI C12.1 and C12.20 national accuracy standards. Revenue-grade 0.5% accuracy. Comes with a lower cover which has two 3/4″ knockouts to connect the conduits. One in-inline fuse with holder is attached for you to connect the hot wire A to VA of the meter. The meter is powered by VA and VN. VB and VC just take the reference of voltage from hot wire B, C. They do not need in-inline fuse. Please connect the wiring as per picture 4.
- DAE Cloud Metering (2nd picture) available with DAE CC2030 KIT Gateway. CC2030 will collect energy data from DAE electrical meters and send them to Cloud Server through Ethernet. With PC, cell phone or tablet, landlords or property managers can get access to real time data, monthly kWh and billing reports to their tenants. TOU (Time of Use) billing reports are also available. No IT guy required. Just connect wires as per video & ready to go.
- For existing building, hard to draw cable between electric meter (close to electric panel) and CC2030 (close to your router), please choose 1 CC2030 KIT + 2 WSC500 RF Converters to connect electric meter and CC2030 wirelessly. (3rd Picture)
- Indoor use only, DAE B1725 watertight enclosure (5th picture) is available for outdoor use.
- Following CTs are available with the meter. Split Core CTs DAE CT-5000SB (5000A), CT-3000SB (3000A), CT-2000SB (2000A), CT-1500SB (1500A), CT-1000SB (1000A), CT-600S (600A), CT-400S (400A), CT-200SB (200A), CT-100S (100A) and Solid Core CT-600D9 (600A), CT-400D6 (400A), CT-200D3 (200A). Factory Calibration Certificates available. DAE Controls LLC is a Minority Business. Please feel free to get the NMSDC Minority Supplier Certificate from DAE Controls Website.
Bestseller No. 6
Pass-through DIN Rail 120 240 Volts. KWh energy meter
- KWh energy meter 50 or 60 Hz. compatible.
- USA and Latin American market. Internal CTs. Direct pass through.
- Accepts voltages from 110V to 240V
- 2 lines 1 neutral (neutral bypasses the meter) or 1 Line 1 neutral (neutral passes through the meter)
SaleBestseller No. 7
Electric Meter, KWh Meter, Single Phase 4P LED din Rail Electricity Power Consumption Wattmeter Energy Meter, 10-40A
- 【DIN Rail Mounting】The energy monitor is small size, light weight, with good reliability and easy installation. 35mm standard DIN-rail mounting in accordance with standard DIN EN50022. Six widths (12.5mm modulus) in accordance with DIN43880.
- 【5+1 LED Digital Display】Standard configuration 5+1(99999.1KWh) digital display. Double color LED of kilowatt meter indicates the power status (green) and the energy pulse signal (red).
- 【Easy to Contact】The standard configuration pulse output is passive (polar) and the remote pulse output can be selected as passive (non-polar). KWH meter is easy to contact with various AMR systems and conforms to the standards IEC 62053-31 and DIN43864.
- 【One-way measurement】One-way measurement of single-phase two – wire active energy consumption. This has nothing to do with the direction of the load current. Comply with IEC 62053-21.
- 【Two Wiring Methods】The din rail energy meter has direct connection operation, two wiring methods. Standard configuration S type wiring, U type wiring can be selected. Extend the terminal cover to protect the use of the security.
Bestseller No. 8
DAE P204-200D-S KIT, UL, Demand, Electric CTEP kWh Submeter, 3p4w(3 hot wire, 1 Neutral), 200A,120/208v, 3 CTs
- UL/cUL Listed, California CTEP approved. Conform to ANSI C12.1 and C12.20 national accuracy standards. Revenue-grade 0.5% accuracy. Comes with a lower cover which has two 3/4″ knockouts to connect the conduits. One in-inline fuse with holder is attached for you to connect hot wire A to VA of the meter. The meter is powered by VA and VN. VB and VC just take the reference of voltage from hot wire B, C. They do not need in-inline fuse.
- P254-200D KIT is ready for Cloud Metering (2nd picture) with DAE CC2030 Gateway. CC2030 will collect energy data from DAE electrical meters and send them to Cloud Server through Ethernet. With PC, cell phone or tablet, landlords or property managers can get access to real time data, monthly kWh and billing reports to their tenants. TOU (Time of Use) billing reports are also available. No IT guy required. Just connect wires as per a simple picture (see video) & ready to go.
- P254-200D KIT is ready for wireless remote reading (3rd picture) with DAE WSC500 RF converters.
- Factory Calibration Certificates available. DAE Controls LLC is an Minority Business. Please feel free to get the NMSDC Minority Supplier Certificate from DAE Controls Website. Following CTs are available with the meter. Split Core CTs DAE CT-5000SB (5000A), CT-3000SB (3000A), CT-2000SB (2000A), CT-1500SB (1500A), CT-1000SB (1000A), CT-600S (600A), CT-400S (400A), CT-200SB (200A), CT-100S (100A) and Solid Core CT-600D9 (600A), CT-400D6 (400A), CT-200D3 (200A).
- Indoor use only, DAE B1725 watertight enclosure is available for outdoor use (4th picture).
Bestseller No. 9
DAE AS200U-75P Water Meter with Pulse Output, 3/4″ NPT Couplings, Measuring in Gallons
- Horizontal Inline mount with dial facing upwards. For installing vertically with water flowing upwards, please refer to DAE V-75P. Or DAE VM-75P which can be installed in any position, vertically, horizontally, water flowing downwards or upwards, dial facing upwards, downwards or side-way. Not for use of pit application. For outdoor use, please refer to DAE MJ-75c, PD-75.
- Cloud Metering available (2nd picture) with DAE CC2030 Gateway. CC2030 will collect water usage from DAE AMR (for 16 meters) or AMR130AN (for 1 meter) and send them to cloud server through Ethernet. With PC, cell phone, the landlords can see real time data, monthly water usage & billing reports to their tenants. If there is abnormal usage (ex. Broken piping), an email alert will be sent to your cell phone. No IT guy required. Just connect wires as per a simple picture (see video) & ready to go.
- Ready for use with CO-10 (Electronic Pulse Counter) or CO-10 KIT – An inexpensive remote reading solution (6th picture). Can also use with DAE AMR130 (Auto Meter Reading Module for single water meter) and AMR (for 16 water meters) for remote reading (5th picture).
- For product description, you can also refer to “Specification Sheet” in “Product guides and documents”. To install the DAE 3/4″ water meter with the 3/4″ garden hose at both ends (or one end with hose bibb and the other with garden hose), you will need 2 DAE CG-75 Fitting. Factory Calibration Certificates available. DAE Controls LLC is a Minority Business. Please feel free to get the NMSDC Minority Supplier Certificate from DAE Controls Website.
- Accuracy: +/-1.5% within normal flow as per AWWA Standard. Conforms to both AWWA and ISO 4064, for clean water only. Maximum Normal Flow Rate: 10 GPM, Minimum Flow Rate: 0.25 GPM.
Bestseller No. 10
DAE P206-400-S KIT, 400A, 277/480v, UL kWh Smart Submeter, Polaris 2000, 3P4W (3 hot wire,1 Neutral), 3 CTs (inner dia. 1.38″)
- UL/cUL Listed, Conform to ANSI C12.1 and C12.20 national accuracy standards. Revenue-grade 0.5% accuracy. Comes with a lower cover which has two 3/4″ knockouts to connect the conduits. One in-inline fuse with holder is attached for you to connect hot wire A to VA of the meter. The meter is powered by VA and VN. VB and VC just take the reference of voltage from hot wire B, C. They do not need in-inline fuse.
- P256-400-S KIT is ready for Cloud Metering (2nd picture) with DAE CC2030 Gateway. CC2030 will collect energy data from DAE electrical meters and send them to Cloud Server through Ethernet. With PC, cell phone or tablet, landlords or property managers can get access to real time data, monthly kWh and billing reports to their tenants. TOU (Time of Use) billing reports are also available. No IT guy required. Just connect wires as per a simple picture (see video) & ready to go.
- P256-400-S KIT is ready for wireless remote reading (3rd picture) with DAE WSC500 RF converters.
- Factory Calibration Certificates available. DAE Controls LLC is an Minority Business. Please feel free to get the NMSDC Minority Supplier Certificate from DAE Controls Website. Following CTs are available with the meter. Split Core CTs DAE CT-5000SB (5000A), CT-3000SB (3000A), CT-2000SB (2000A), CT-1500SB (1500A), CT-1000SB (1000A), CT-600S (600A), CT-400S (400A), CT-200SB (200A), CT-100S (100A) and Solid Core CT-600D9 (600A), CT-400D6 (400A), CT-200D3 (200A).
- Indoor use only, DAE B1725 watertight enclosure is available for outdoor use (4th picture).
Bestseller No. 11
Single Phase kWh Meter, Pass-Through, 2 or 3-Wire, 120V up to 120/240V, 100A, 60Hz
- Single Phase 120/240V 3-Wire (2 hots, 1 neutral)
- Single Phase 120V or 208-240V 2-Wire (1 hot, 1 neutral)
- Single Phase 120V or 208-240V 2-Wire (2 hots)
- Up to 100A and 13.5mm Wire Diameter (22 AWG – 1 AWG wire)
- Read locally on the LCD display or remotely via pulse output
Bestseller No. 12
Baomain DDS238-4 (30-100) Single Phase DIN-Rail Kilowatt Hour kwh Meter 220V 100A
- Rate Voltage:220V 230V 240V Rate Current:30(100A)
- 220V Single Phase DIN-rail Kilowatt Hour kwh Meter
- Insulation Performance:AC voltage 2KV for 1 minute,impulse voltage 6KV
- Accuracy Class:Class 1 Starting Current:0.4%lb;Weight:281g;
- 35mm standard DIN rail installation,complying with standard DIN EN5002
- Package Content: 1 x Meter
SaleBestseller No. 13
CrocSee AC 80-260V 100A CRS-022B LCD Display Digital Current Voltage Power Energy Frequency Power Factor Multimeter Ammeter Voltmeter with 100A Split Core Current Transformer
- The meter can only measure the active power(real power). It doesn’t show Apparent power. If you measure power from a DC-AC inverter, please make sure it’s PURE SINE WAVE. Otherwise the meter can be burnt or melted.
- 6 in 1 Meter：The large clear screen can display voltage/ current/ active power/ cumulative energy/ frequency/ power factor at the same time.
- Easy to Read: The backlight can be turned on/off manually, easy to read in the dark or in bright light.
- Overload Alarm Feature: Backlight and power digits will flash when exceeding the preset power value.
- One Button Control: The button is designed to control the backlight, reset energy data, or preset power alarm threshold.
SaleBestseller No. 14
Leviton 1K240-2SW Series 1000 120/240V 200A 1P3W Indoor Kit with 2 Solid Core CTs
- Measures kWh and peak demand (optional)
- Certified to all applicable standards of ANSI C12.1
- Equipped with both Isolated Pulse Output and RS-485 Serial Port (Modbus Native) standard for easy interface with most AMR and BAS systems
- Utilizes revenue grade 0.3 accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements or 1-Percent accuracy split-core CTs
- Up to three sets of CTs per phase can be paralleled per meter
Bestseller No. 15
Smart Home Energy Monitor with 16 50A Circuit Level Sensors | Vue – Real Time Electricity Monitor/Meter | Solar/Net Metering
- INSTALLS IN CIRCUIT PANEL of most homes with clamp-on sensors. Supports single-phase up to 240VAC line-neutral; single, split-phase 120/240VAC; and three-phase up to 415Y/240VAC (no Delta). Panels with access only to busbars will need flexible sensors available from Emporia Energy. Includes DIY instructions, though a professional electrician is recommended.
- 24/7 ENERGY MONITORING: Monitor your home’s real power anywhere, anytime to prevent costly repairs, conserve energy, and save costs. Monitor solar / net metering. Light commercial 3 phase option available as a separate bundle. PROTECTED BY A 1-YEAR WARRANTY.
- APPLIANCE MONITORING WITHOUT GUESSWORK: Comes with sixteen (16) 50A sensors to accurately monitor your air conditioner, furnace, water heater, washer, dryer, range, etc.
- LOWER YOUR ELECTRIC BILL: Gauge real-time spending and get actionable notifications to understand where you can save costs.
- REAL-TIME ENERGY DATA: REQUIRES 2.4 GHz WIFI WITH AN INTERNET CONNECTION to monitor energy use with iPhone / Android app. Vue sensors provide 1-second data and are accurate from ±2%. The Vue is UL and CE Listed for your safety. 1 second data is retained 3 hours, 1 minute data is retained 7 days, 1 hour data is retained indefinitely. Export the data whenever you want in the app.
