Today, my friend gave me a difficult problem. He said he liked visor hat and asked me to make one according to the picture. So today, Sister Yu will share with you a unique cutting method to see how to cut visor hat? Without drawings?
First of all, measure the circumference of the head, take out a size, and then add one inch, then the diameter of my head is one foot six, and then add one inch is one foot 77 divided by 3.14, which equals five inches three. Draw a circle with five inches three as the diameter. Then there is a section of the upper rubber band left behind the visor hat. Let’s find out the size of the upper rubber band. First, draw a straight line from this dot. Take two inches here and two inches here.So now let’s take a look at the width of this visor hat. In this way, it is about four inches by visual inspection. I will take it as four inches, find four inches from the front, and then paint a big arc from this point. Let’s first find a pencil to draw it. If it is not suitable, we can fine-tune it. Just draw this half.
Then the visor hat has a slope, which can be five points outward from this point. The greater the slope, the greater the size. Then draw an arc and give it a straight line.Then turn this circle outward, fold it in half from this straight line, and then cut off the visor hat part along the line. This is not done yet, because there are many folds on the visor hat. The distance between each fold is about one inch, and the amount of each fold is about one inch. Let’s draw an inch from this arc, and then draw a straight line from these points to the edge of the hat.Cut it in two layers like this. Don’t cut the seam in the middle and open it. Then we attach it to the paper. Each fold is one inch. Draw it along the edge. At the same time, mark the two points of the fold. When we get to the middle of the cutting line, we give five points to this side.
Mark a point below, connect the two points directly, and then draw it smoothly, so that the visor hat is cut. So how do you cut the brim?Take out the width and length of the cloth strip according to the width of the hat edge of one inch plus three points, take the size of the hat tail of one foot seven minus four inches, and then add six points to sew, so that it is one foot three inches six, this needs to be cut out two, then there is a rubber band in the back. We left four inches for the position of the rubber band, four inches plus two inches, six inches, and then add six points to sew, take out this length.Take out the width of the cloth strip and the length of the rubber band by three inches and then add a six-part seam. In this way, the hat is cut. Want to know how to make this hat? We will continue to talk about it next time.
